Elevate your performance venue to the next level with this seated riser stage set!
The
3-Tier Seated Riser Carpeted Stage Set is the reliable and
affordable choice for your school performances and assemblies. Users are
supported by a heavy-duty, 16-gauge steel, black powder-coated frame.
The premium 3/4" thick plywood deck is durable and features a
firmly-affixed carpeted surface. Legs are constructed with 14-gauge
steel tubing and feature simple and safe spring-loaded locking
mechanisms allowing for quick set-up assembly and folds up easily for
manageable portable storage.
The stage offers a secure weight capacity of over 200 lbs. per
square foot. High-impact plastic glides will ensure floors are
protected from damage. Firmly welded ganging devices let users combine
equal-height stages to create a large single stage platform or assemble
different sizes to create choral or band riser configurations. This set
includes 14-gauge guardrails for extra safety.
Please Note: Guardrails are recommended while using any stages or risers to ensure safety.
Colors
Available in choice of Black, Grey, Blue or Red carpet.
Platform
Constructed with a " thick solid plywood core, the riser shall
be surfaced with one of the following: Option 1: Carpet, Option 2: 1/8"
thick tempered hardboard. The edges of the platform shall be routed to
allow the frame to fit flush with the top surface and cover the ends of
the carpeting.
Frame
16 gauge, 1-13/16" high formed steel channel frame shall be
reinforced with 16 gauge steel angle welded to the inside of the
channel. The angle shall provide a continuous support to which the
decking is secured with screws placed a maximum of 9" apart. The frame
shall completely enclose the top, bottom and edges of the decking
perimeter preventing the decking from becoming loose and damaged. All
areas where frame parts are joined together shall be reinforce with
steel plates attached with rivets.
Leg Structure
Each leg structure shall be constructed of 1.05" diameter, 14
gauge steel tubing capped at the point of floor contact with high impact
plastic glides. The vertical load bearing members shall be joined at
the top by full width, steel tube to provide maximum support to the
stage deck. The top of each leg assembly shall fold open and closed,
using 16 gauge steel saddle clips that are secured with at least four
screws. Leg assemblies shall be braced by friction type braces, equipped
with a spring locking device to secure the legs in the open and closed
position. Braces shall be secured to the leg assembly with rivets and to
the deck using 8 screws installed through the decking. Legs shall open
and close using only one hand. Gravity ring type brace locks are not
acceptable.
Ganging
Stages and risers shall be equipped with drop-in couplings that
allow units of the same or different heights to be joined together. All
ganging devices shall be permanently secured to each unit. Ganging
devices that is not permanently attached are not acceptable. Finish All
metal parts are to be finished with a black thermofused epoxy
powdercoating.
Capacity
All metal parts shall be designed to carry a uniform live load of at least 200 lbs per square foot.
Portability
Stages and risers shall be capable of being completely set-up and
taken apart quickly, without the need for tools, by two people of
average strength.