Create a curved seated riser system with this riser stage pie set!
2-Tier Seated Riser Hardboard Stage Pie Set is the reliable and
affordable choice for your school performances and assemblies. Users are
supported by a heavy-duty, 16-gauge steel, black powder-coated frame.
The premium 3/4" thick plywood deck is durable and features a
firmly-affixed hardboard surface. Legs are constructed with 14-gauge
steel tubing and feature simple and safe spring-loaded locking
mechanisms allowing for quick set-up assembly and folds up easily for
manageable portable storage.
This stage pie set offers a secure
weight capacity of over 200 lbs. per square foot. High-impact plastic
glides will ensure floors are protected from damage. Firmly welded
ganging devices let users combine equal-height stages to create a large
single stage platform or assemble different sizes to create choral or
band riser configurations. This set includes 14-gauge guardrails for
extra safety.
Please Note: Guardrails are recommended while using any stages or risers to ensure safety.
Colors
Hardboard Surface.
Platform
Constructed
with a " thick solid plywood core, the riser shall be surfaced with
one of the following: Option 1: Carpet, Option 2: 1/8" thick tempered
hardboard. The edges of the platform shall be routed to allow the frame
to fit flush with the top surface and cover the ends of the hardboard
surface.
Frame
16 gauge, 1-13/16" high
formed steel channel frame shall be reinforced with 16 gauge steel angle
welded to the inside of the channel. The angle shall provide a
continuous support to which the decking is secured with screws placed a
maximum of 9" apart. The frame shall completely enclose the top, bottom
and edges of the decking perimeter preventing the decking from becoming
loose and damaged. All areas where frame parts are joined together shall
be reinforce with steel plates attached with rivets.
Leg Structure
Each
leg structure shall be constructed of 1.05" diameter, 14 gauge steel
tubing capped at the point of floor contact with high impact plastic
glides. The vertical load bearing members shall be joined at the top by
full width, steel tube to provide maximum support to the stage deck. The
top of each leg assembly shall fold open and closed, using 16 gauge
steel saddle clips that are secured with at least four screws. Leg
assemblies shall be braced by friction type braces, equipped with a
spring locking device to secure the legs in the open and closed
position. Braces shall be secured to the leg assembly with rivets and to
the deck using 8 screws installed through the decking. Legs shall open
and close using only one hand. Gravity ring type brace locks are not
acceptable.
Ganging
Stages and risers shall
be equipped with drop-in couplings that allow units of the same or
different heights to be joined together. All ganging devices shall be
permanently secured to each unit. Ganging devices that is not
permanently attached are not acceptable. Finish All metal parts are to
be finished with a black thermofused epoxy powdercoating.
Capacity
All metal parts shall be designed to carry a uniform live load of at least 200 lbs. per square foot.
Portability
Stages
and risers shall be capable of being completely set-up and taken apart
quickly, without the need for tools, by two people of average strength.
