Home >

National Public Seating Seated Riser Stage Pie Tier, 32" Tall (48" Deep)
National Public Seating Seated Riser Stage Pie Tier, 32" Tall (48" Deep)
 
Alternate Views


Our Price: $836.99

Product Code: SD-SP4832C

Color

Choose Carpet Color*:


:  
Description
 

Create a curved seated riser system with this riser stage pie unit!

Portable Stage Pie Units are the building blocks for creating the perfect riser for your school performances and assemblies. Users are supported by a heavy-duty, 16-gauge steel, black powder-coated frame. The premium 3/4" thick plywood deck is durable and features a firmly-affixed carpeted surface. Legs are constructed with 14-gauge steel tubing and feature simple and safe spring-loaded locking mechanisms allowing for quick set-up assembly and folds up easily for manageable portable storage.

This stage pie unit offers a secure weight capacity of over 200 lbs per square foot. High-impact plastic glides will ensure floors are protected from damage. Firmly welded ganging devices let users combine equal-height stages to create a large single stage platform or assemble different sizes to create choral or band riser configurations.

Please Note: Guardrails are recommended while using any stages or risers to ensure safety.

Features

Colors

Available in choice of Black, Grey, Blue or Red carpet.

Platform

Constructed with a " thick solid plywood core, the riser shall be surfaced with one of the following: Option 1: Carpet, Option 2: 1/8" thick tempered hardboard. The edges of the platform shall be routed to allow the frame to fit flush with the top surface and cover the ends of the carpeting.

Frame

16 gauge, 1-13/16" high formed steel channel frame shall be reinforced with 16 gauge steel angle welded to the inside of the channel. The angle shall provide a continuous support to which the decking is secured with screws placed a maximum of 9" apart. The frame shall completely enclose the top, bottom and edges of the decking perimeter preventing the decking from becoming loose and damaged. All areas where frame parts are joined together shall be reinforce with steel plates attached with rivets.

Leg Structure

Each leg structure shall be constructed of 1.05" diameter, 14 gauge steel tubing capped at the point of floor contact with high impact plastic glides. The vertical load bearing members shall be joined at the top by full width, steel tube to provide maximum support to the stage deck. The top of each leg assembly shall fold open and closed, using 16 gauge steel saddle clips that are secured with at least four screws. Leg assemblies shall be braced by friction type braces, equipped with a spring locking device to secure the legs in the open and closed position. Braces shall be secured to the leg assembly with rivets and to the deck using 8 screws installed through the decking. Legs shall open and close using only one hand. Gravity ring type brace locks are not acceptable.

Ganging

Stages and risers shall be equipped with drop-in couplings that allow units of the same or different heights to be joined together. All ganging devices shall be permanently secured to each unit. Ganging devices that is not permanently attached are not acceptable. Finish All metal parts are to be finished with a black thermofused epoxy powdercoating.

Capacity

All metal parts shall be designed to carry a uniform live load of at least 200 lbs. per square foot.

Portability

Stages and risers shall be capable of being completely set-up and taken apart quickly, without the need for tools, by two people of average strength.