Elevate your performances to the next level with this seated riser stage set!
The 3-Tier Seated Riser Carpeted Stage Set is
the reliable and affordable choice for your school performances and
assemblies. Users are supported by a heavy-duty, 16-gauge steel, black
powder-coated frame. The premium 3/4" thick plywood deck is durable and
features a firmly-affixed carpeted surface. Legs are constructed with
14-gauge steel tubing and feature simple and safe spring-loaded locking
mechanisms allowing for quick set-up assembly and folds up easily for
manageable portable storage.
The stage offers a secure weight capacity of over 200 lbs per
square foot. High-impact plastic glides will ensure floors are
protected from damage. Firmly welded ganging devices let users combine
equal-height stages to create a large single stage platform or assemble
different sizes to create choral or band riser configurations. This set
includes 14-gauge guardrails for extra safety.
Please Note: Guardrails are recommended while using any stages or risers to ensure safety.
Platform
Constructed with a " thick solid plywood core, the riser shall
be surfaced with one of the following: Option 1: Carpet, Option 2: 1/8"
thick tempered hardboard. The edges of the platform shall be routed to
allow the frame to fit flush with the top surface and cover the ends of
the carpeting.
Frame
16 gauge, 1-13/16" high formed steel
channel frame shall be reinforced with 16 gauge steel angle welded to
the inside of the channel. The angle shall provide a continuous support
to which the decking is secured with screws placed a maximum of 9"
apart. The frame shall completely enclose the top, bottom and edges of
the decking perimeter preventing the decking from becoming loose and
damaged. All areas where frame parts are joined together shall be
reinforce with steel plates attached with rivets.
Leg Structure
Each leg structure shall be
constructed of 1.05" diameter, 14 gauge steel tubing capped at the point
of floor contact with high impact plastic glides. The vertical load
bearing members shall be joined at the top by full width, steel tube to
provide maximum support to the stage deck. The top of each leg assembly
shall fold open and closed, using 16 gauge steel saddle clips that are
secured with at least four screws. Leg assemblies shall be braced by
friction type braces, equipped with a spring locking device to secure
the legs in the open and closed position. Braces shall be secured to the
leg assembly with rivets and to the deck using 8 screws installed
through the decking. Legs shall open and close using only one hand.
Gravity ring type brace locks are not acceptable.
Ganging
Stages and risers shall be equipped
with drop-in couplings that allow units of the same or different heights
to be joined together. All ganging devices shall be permanently secured
to each unit. Ganging devices that is not permanently attached are not
acceptable. Finish All metal parts are to be finished with a black
thermofused epoxy powdercoating.
Capacity
All metal parts shall be designed to carry a uniform live load of at least 200 lbs. per square foot.
Portability
Stages and risers shall be
capable of being completely set-up and taken apart quickly, without the
need for tools, by two people of average strength.